Human Fucosyltransferase 3 (FUT3) ELISA Kit

Principle of the Assay

The microtiter plate provided in this kit has been pre-coated with an antibody specific to FUT3. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody preparation specific to FUT3. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After the TMB substrate solution is added, only those wells that contain FUT3, biotin-conjugated antibody, and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution, and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of FUT3 in the samples is then determined by comparing the O.D. of the samples to the standard curve.

For Use with serum, plasma, and cell culture supernatants. For Research Use Only. Not for use in diagnostic procedures.

Target Information

Catalyzes the transfer of L-fucose, from a guanosine diphosphate-beta-L-fucose, to both the subterminal N-acetyl glucosamine (GlcNAc) of type 1 chain (beta-D-Gal-(1->3)-beta-D-GlcNAc) glycolipids and oligosaccharides via an alpha(1,4) linkage, and the subterminal glucose (Glc) or GlcNAc of type 2 chain (beta-D-Gal-(1->4)-beta-D-GlcNAc) oligosaccharides via an alpha(1,3) linkage, independently of the presence of terminal alpha-L-fucosyl-(1,2) moieties on the terminal galactose of these acceptors and participates in the blood groups Lewis determination and expression of Lewis a (Le(a)), lewis b (Le(b)), Lewis x/SSEA-1 (Le(x)) and lewis y (Le(y)) antigens (PubMed:12668675, PubMed:1977660, PubMed:11058871). Also catalyzes the transfer of L-fucose to subterminal GlcNAc of sialyl- and disialyl-lactotetraosylceramide to produce sialyl Lewis a (sLe(a)) and disialyl Lewis a via an alpha(1,4) linkage and therefore may regulate cell surface sialyl Lewis a expression and consequently regulates adhesive properties to E-selectin, cell proliferation and migration (PubMed:12668675, PubMed:11058871, PubMed:27453266). Catalyzes the transfer of an L-fucose to 3'-sialyl-N-acetyllactosamine by an alpha(1,3) linkage, which allows the formation of sialyl-Lewis x structure and therefore may regulate the sialyl-Lewis x surface antigen expression and consequently adhesive properties to E-selectin (PubMed:11058871, PubMed:29593094). Prefers type 1 chain over type 2 acceptors (PubMed:7721776). Type 1 tetrasaccharide is a better acceptor than type 1 disaccharide suggesting that a beta anomeric configuration of GlcNAc in the substrate is preferred (PubMed:7721776). Lewis-positive (Le(+)) individuals have an active enzyme while Lewis-negative (Le(-)) individuals have an inactive enzyme (PubMed:1977660).

GENE ID	2525
SWISS PROT	P21217
SYNONYMS	CD174; FUT3; FT3B; LE; Les; FucT-III; Lewis FT; Galactoside 3(4)-L-Fucosyltransferase, Lewis Blood Group; Blood group Lewis alpha-4-fucosyltransferase

Materials Supplied

Kit Components	96 Wells Quantity/Size
Pre-coated, ready-to-use 96-well strip plate	1 plate
Plate sealer for 96 wells	2
Standard	2 tubes
Diluent buffer	1 bottle
Detection Reagent A	1 bottle
Detection Reagent B	1 bottle
TMB Substrate	1 tube
Stop Solution	1 tube
Wash Buffer (30 ℅ concentrate)	1 tube
Product data sheet	1 copy

Storage

The TMB Substrate, Wash Buffer (30X concentrate), and the Stop Solution should be stored at 4°C upon receipt, while the other items should be stored at -20°C.

Performance Characteristics

REPEATABILITY	Intra-assay Precision (Precision within an assay): 3 samples with low, middle, and high-level FUT3 were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, middle, and high-level FUT3 were tested on 3 different plates, with 8 replicates in each plate. CV(%) = SD/meanX100 Intra-Assay: CV<10% Inter-Assay: CV<12%
SENSITIVITY	The minimum detectable dose was 0.062ng/mL.
ASSAY RANGE	0.156-10ng/mL
SPECIFICITY	This assay has high sensitivity and excellent specificity for the detection of FUT3. No significant cross-reactivity or interference between FUT3 and analogs was observed. Note: Limited by current skills and knowledge, it is impossible to perform all possible cross-reactivity detection tests between FUT3 and all analogs, therefore, cross reactivity may still exist.