Human Laminin Receptor 1 (LAMR1) ELISA Kit

Principle of the Assay

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Human LAMR1. Standards or samples are added to the appropriate microtiter plate wells then with a biotin-conjugated antibody specific to Human LAMR1. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Human LAMR1, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Human LAMR1 in the samples is then determined by comparing the OD of the samples to the standard curve.

For use with: tissue homogenates, cell lysates, and other biological fluids.

For Research Use Only. Not for use in diagnostic procedures.

Target Information

Required for the assembly and/or stability of the 40S ribosomal subunit. Required for the processing of the 20S rRNA-precursor to mature 18S rRNA in a late step of the maturation of 40S ribosomal subunits. Also functions as a cell surface receptor for laminin. Plays a role in cell adhesion to the basement membrane and in the consequent activation of signaling transduction pathways. May play a role in cell fate determination and tissue morphogenesis. Acts as a PPP1R16B-dependent substrate of PPP1CA.

GENE ID	3921
SWISS PROT	P08865
SYNONYMS	RPSA; LRP; 37LRP; p40; 40S ribosomal protein SA; 37 kDa laminin receptor precursor; Colon carcinoma laminin-binding protein; Multidrug resistance-associated protein MGr1-Ag

Materials Supplied

Kit Components	96 Wells Quantity/Size
Pre-Coated Microplate	48T: 6 strips x 8 wells; 96T: 12 strips x 8 wells
Standard (Lyophilized)	48T: 1 vial; 96T: 2 vials
Biotinylated Antibody (100×)	48T: 60 μL; 96T: 120 μL
Streptavidin-HRP (100×)	48T: 60 μL; 96T: 120 μL
Standard/Sample Diluent Buffer	48T: 10 mL; 96T: 20 mL
Biotinylated Antibody Diluent	48T: 6 mL; 96T: 12 mL
HRP Diluent	48T: 6 mL; 96T: 12 mL
Wash Buffer (25×)	48T: 10 mL; 96T: 20 mL
TMB Substrate Solution	48T: 6 mL; 96T: 10 mL
Stop Reagent	48T: 3 mL; 96T: 6 mL
Plate Covers	48T: 1 piece; 96T: 2 pieces

Storage

Storage

*If the kit is opened, Store the whole kit at 4°C. If the kit is not used up in 1 week. Store the Pre-Coated Microplate, Standard ,Biotinylated Antibody and Streptavidin-HRP at -20°C, the rest reagents at 4°C, please used up within 6 months. *If the kit is not opened, store the whole kit: 4°C(short time storage, valid for 6 months); -20°C (long-term storage, valid for 1 year). Avoid repeated freeze-thaw cycles.

Performance Characteristics

REPEATABILITY	Intra-assay Precision (Precision within an assay)：CV% < 8% Three samples of known concentration were tested twenty times on 1 plate to assess intra-assay precision. Inter-assay Precision (precision between assays)：CV% < 10% Three samples of known concentration were tested in forty separate assays to assess inter-assay precision.
SENSITIVITY	The minimum detectable dose was 28pg/mL.
ASSAY RANGE	78.13–5,000pg/mL
SPECIFICITY	This assay has high sensitivity and excellent specificity for detection of Human LAMR1. No significant cross-reactivity or interference between Human LAMR1 and analogues was observed.