Rat Connexin 43 (CX43) ELISA Kit

Principle of the Assay

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Rat CX43. Standards or samples are added to the appropriate microtiter plate wells then with a biotin-conjugated antibody specific to Rat CX43. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Rat CX43, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Rat CX43 in the samples is then determined by comparing the OD of the samples to the standard curve.

For use with: tissue homogenates, cell lysates, and other biological fluids.

For Research Use Only. Not for use in diagnostic procedures.

Target Information

Gap junction protein that acts as a regulator of bladder capacity. A gap junction consists of a cluster of closely packed pairs of transmembrane channels, the connexons, through which materials of low MW diffuse from one cell to a neighboring cell. Negative regulator of bladder functional capacity: acts by enhancing intercellular electrical and chemical transmission, thus sensitizing bladder muscles to cholinergic neural stimuli and causing them to contract (By similarity). May play a role in cell growth inhibition through the regulation of NOV expression and localization (PubMed:15181016). Plays an essential role in gap junction communication in the ventricles (By similarity).

GENE ID	24392
SWISS PROT	P08050
SYNONYMS	ODDD; GJAL; GJA1; GJ-A1; Gap junction 43 kDa heart protein; Gap Junction Protein Alpha 1; Oculodentodigital Dysplasia; Syndactyly Type III

Materials Supplied

Kit Components	96 Wells Quantity/Size
Pre-Coated Microplate	48T: 6 strips x 8 wells; 96T: 12 strips x 8 wells
Standard (Lyophilized)	48T: 1 vial; 96T: 2 vials
Biotinylated Antibody (100×)	48T: 60 μL; 96T: 120 μL
Streptavidin-HRP (100×)	48T: 60 μL; 96T: 120 μL
Standard/Sample Diluent Buffer	48T: 10 mL; 96T: 20 mL
Biotinylated Antibody Diluent	48T: 6 mL; 96T: 12 mL
HRP Diluent	48T: 6 mL; 96T: 12 mL
Wash Buffer (25×)	48T: 10 mL; 96T: 20 mL
TMB Substrate Solution	48T: 6 mL; 96T: 10 mL
Stop Reagent	48T: 3 mL; 96T: 6 mL
Plate Covers	48T: 1 piece; 96T: 2 pieces

Storage

Storage

*If the kit is opened, Store the whole kit at 4°C. If the kit is not used up in 1 week. Store the Pre-Coated Microplate, Standard ,Biotinylated Antibody and Streptavidin-HRP at -20°C, the rest reagents at 4°C, please used up within 6 months. *If the kit is not opened, store the whole kit: 4°C(short time storage, valid for 6 months); -20°C (long-term storage, valid for 1 year). Avoid repeated freeze-thaw cycles.

Performance Characteristics

REPEATABILITY	Intra-assay Precision (Precision within an assay)：CV% < 8% Three samples of known concentration were tested twenty times on 1 plate to assess intra-assay precision. Inter-assay Precision (precision between assays)：CV% < 10% Three samples of known concentration were tested in forty separate assays to assess inter-assay precision.
SENSITIVITY	The minimum detectable dose was 0.121ng/mL.
ASSAY RANGE	0.32–20ng/mL
SPECIFICITY	This assay has high sensitivity and excellent specificity for detection of Rat CX43. No significant cross-reactivity or interference between Rat CX43 and analogues was observed.